The Q58 series accumulation catenary shot blasting machine features accumulation catenary control, allowing workpieces to run continuously with the hanging chain, as well as batch or intermittent operation. Parts are loaded and unloaded at fixed points, and shot blasting is carried out at fixed points, with no interference between workstations. Customized hooks can be made according to the user's workpiece cleaning requirements for ease of use.
Main technical parameters:
Project | Q583H | Q585H | Q5810H | Q58 |
productivity (hook/h) | 40 | 40 | 40 | Our company can design and manufacture according to the user's requirements for cleaning workpieces. |
Hook operating speed (m/min) | 0.8-3 | 0.8-3 | 0.8-3 | |
Single hook lifting (kg) | 300 | 500 | 1000 | |
hook spacing (mm) | 500-900 | 500-1000 | 500-1300 | |
shot blasting capacity (kg/min) | 4×250 | 6×250 | 6×330 | |
Hoist lifting capacity (t/h) | 60 | 60 | 120 | |
Separator capacity (t/h) | 60 | 90 | 120 | |
bullet diameter (mm) | 1.5-2.5 | 1.5-3 | 1.5-2.5 | |
Initial loading quantity of projectiles (mm) | 2000 | 2000 | 4000 | |
ventilation rate (m³/h) | 10480 | 14500 | 18000 | |
clean room dimensions (mm) | 3200×2200×2800 | 3200×2400×000 | 3200×2800×3800 | |
Clean up the workpiece dimensions (mm) | (400-800)×1600 | (400-800)×1900 | (400-1200)×2200 | |
Overall dimensions (mm) | 13250×3400×7250 | 13250×4200×7700 | 17650×6625×8300 | |
Pit depth (mm) | ~1800 | ~2100 | ~2400 | |
power consumption (kw) | 83.5 | 73.15 | 188 |
The equipment is suitable for engineering machinery parts, automotive and agricultural machinery components, such as valves, water pump housings, motor housings, hardware tool housings, engine housings, transmissions, cylinder heads, gears, stainless steel pipe fittings, aluminum pipe fittings, etc.