The catenary step feeding shot blasting machine is flexible to use. Different workpieces can be adjusted for different catenary step feeding speeds, shot blasting times, hook rotation parameters, etc. Special hanging hooks can also be customized according to user needs.
Main technical parameters:
Project | Q483H | Q458H | Q4810H | Q48 |
productivity(hook/h) | 20 | 30-40 | 40-60 | Our company can design and manufacture according to the user's requirements for cleaning workpieces. |
Hook operating speed(m/min) | 3-8 | 3-8 | 3-8 | |
Single hook lifting(kg) | 300 | 500 | 1000 | |
hook spacing(mm) | 600-1000 | 600-1000 | 700-1400 | |
shot blasting capacity(kg/min) | 2×200 | 4×250 | 6×250 | |
Hoist lifting capacity(t/h) | 30 | 60 | 90 | |
Separator capacity(t/h) | 30 | 60 | 90 | |
bullet diameter(mm) | 1.5-2.5 | 1.5-2.5 | 1.5-2.5 | |
Initial loading quantity of projectiles(mm) | 1100 | 2000 | 3000-4000 | |
ventilation rate(m³/h) | 5000 | 10480 | 14500 | |
clean room dimensions(mm) | 2900×1800×3200 | 5000×2600×2900 | 3062×2600×3000 | |
Clean up the workpiece dimensions(mm) | (500-900)×1600 | (500-900)×1600 | (600-1300)×1900 | |
Overall dimensions(mm) | 11450×3100×6450 | 9450×3700×7250 | 9450×3700×7700 | |
Pit depth(mm) | pitless | ~1800 | ~2100 | |
power consumption(kw) | 52.8 | 83.15 | 114.72 |
This series is suitable for shot blasting and cleaning of castings, forgings, stamped parts, and weldments produced in large quantities in automobiles, tractors, motors, and other small and medium sized enterprises. It is particularly effective for cleaning engine blocks, transmission cases, cylinder heads, gears, motor housings, valves, bicycle frames, stainless steel pipe fittings, manhole covers, and other items.